How Do I Know My Circuit Breakers Are Failing?

0 Comments

Circuit breakers can go out for a multitude of reasons, and you should be ready whenever it happens. If your circuit breaker goes out, it can affect how things run around your home, and knowing when a circuit breaker is failing so you can have it safely replaced will go a long way in making sure you don’t experience any failures around your home.

The first thing you should do is determine which circuit breaker is going out. This is relatively simple. You will want to go to your electrical panel and look for a diagram showing the layout of the panel or a label next to the tripping breaker. The diagram should show you which circuit the tripping breaker is tied to.

commercial electrician in Evanston, IL

Once you have identified the problematic breaker, you will want to shut it off and unplug everything connected to it. This way, you can make sure everything that was connected to the breaker is safe and protected from potential surges before you go onto the next step.

Finally, you will want to reset your circuit breaker. Go back to your panel and flip the breaker back into its ON switch. Listen closely for a definitive click, because if you don’t hear it click back into place, it is possible the breaker is faulty.

If your breaker trips again right away, the chances are high that you are experiencing a bad breaker or even a short circuit.

Think you’re having a problem with your breakers? Then you will want to get in touch with a commercial electrician in Evanston, IL to give you a hand. Your electrician will be able to safely replace the breaker for you and make sure everything is in good working order. In no time at all, you will be back to having everything fully functional and not have to worry about it anymore.